Natural Lava
Mallet SAS


21st Aug 2014 - We are exhibiting at the Surface Design Show 10-12th Feb 2015 at the Design Centre in Islington London - Follow this link

5th Apr 2014 - Meet us again at Hotelympia Excel London stand 2722 between the 28th April & the 1st of May 2014. We are located in the Design Hall opposite the International Design Lounge - Follow this link

More News >>

Products & production
Installation procedures

Glazed lava cladding for building facades

The glazed lava stone from Pyrolave is an excellent choice for cladding bespoke buildings. It offers the inherent strength of a stone combined with all the surface qualities associated with enamels. Glazed lava is frost resistant & impervious to rain. All our vivid glazes are UV stable & will not rot nor delaminate & are regarded as self cleaning during the climatic cycle. It can be used as an open jointed rain-screen system mechanically fixed (see our recommended fixing systems section) or as traditional jointed faience.

The blocks we extract at the quarry are typicaly rectangular & the majority of which yield slab sizes of approx 1200 x 700mm & so this is the most economical way of planning your scheme following naturally occurring sizes in rectangular shapes. Bigger blocks are quite rare & whilst they are available they cannot be considered for extreme quantities.

 EN1469 Accredited

 2012 Technical Data Sheet

Available in the following formats;

10mm thick - all sizes up to 300 x 300mm for faience work

15mm thick - all sizes up to 600 x 1200mm

25mm thick - all sizes up to 1000 x 2000mm

30/40/60/80mm thick - all sizes up to 1300 x 2600mm

Facade fixing systems for Pyrolave > go to accessories on the navigation bar


Copyright © 2018 Pyrolave Architecture - Web Design by GPR.NET